Happy Wedding Maria Ulfah PD

Apalagi yg kau takutkan
Telah terpenuhilah mimpimu
Mimpi setiap gadis kecil kebanyakan, mempelai wanita

Telah sampailah dirimu
Untuk mencapai kasih sayang yang haqiqi

Happy wedding
Alfa

EIGRP - Redistribution - RIP - OSPF

Hi guys, now we are still runing on EIGRP, but what if we have to adapt in different routing Protocol? it's called redistribution. This is the way we have to do, to connecting one routing protocol into different one.

Redistribute Rip into EIGRP
As usual, Configure R1, R2 and R3 as EIGRP. On R1 add ip loopback which will be advertise as RIP, then redistributed it into EIGRP. Check this configuration below :

• R1(Config)#int lo100
• R1(Config-if)#ip address 100.100.100.100 255.255.255.255

Advertise to RIP

• R1(Config)#router rip
• R1(Config-router)#version 2
• R1(Config-router)#no auto-summary
• R1(Config-router)#network 100.100.100.0

Resitribute to EIGRP

• R1(Config)#router eigrp 1
• R1(Config-router)#redistribute rip metric 1 1 1 1 1

What does metric means? Metric value on eigrp is :

• Bandwidth metric in Kbits per second
• EIGRP delay metric, in 10 microsecond units
• EIGRP reliability metric where 255 is 100% reliable
• EIGRP effective bandwidth metric (Loading) where 255 loaded
• EIGRP MTU of the path

Ignore that value, use this value : 

• R1(Config-router)#redistribute rip metric 1 1 1 1 1

In this case, metric value is different with the actual condition. But its function and how this routing works, is not different, cause we are riding from external route. The most important is metric must be filled up, now matter how much the value is, there is no effect.

As shown on R3, there is EX behind network 100.100.100.100. EX means that network 100.100.100.100 comes from external / different routing protocol.

Redistribute OSPF to EIGRP

On R1 add ip loopback which will be advertise as OSPF, then redistributed it into EIGRP. Check this configuration below :

• R1(Config)#int lo101
• R1(Config-if)#ip address 101.101.101.101 255.255.255.255

Advertise to OSPF

• R1(Config)#router OSPF 1
• R1(Config-router)#network 101.101.101.101 0.0.0.0 area 0

Resitribute to EIGRP

• R1(Config)#router eigrp 1
• R1(Config-router)#redistribute ospf 1 metric 1 1 1 1 1

EIGRP - Authentication - Summarization - Unicast Update - Default Route Summary Address

EIGRP - Authentication
In EIGRP, there is only MD5 Authenication, no clear text authentication. So, here are the configuration :

EIGRP - Summarization

Summarization makes several route become only one summary. We have to advertise some ip loopback in R3 then summarized it. As it shown in R1, its already summarized as 10.0.0.0/29.

Add configuration below, in interface fa0/0 R3, but you must calculate its advertise prefix :

• R3(config-id)#ip summary-address eigrp 1 10.0.0.0 255.255.255.248

EIGRP - Unicast Update

By default EIGRP use its multicast 224.0.0.10 to update their routing table. This time we will change to unicast update.

Change to unicast (R1-R2)

• R1(config-router)#neighbour 12.12.12.2 s0/0

Change to unicast (R2-R1)

• R2(config-router)#neighbour 12.12.12.1 s0/0

You could check its update by activate "debug ip packet detail" on each router. Make sure its update already change from 224.0.0.10 to its neighbour.

• R1(config)#debug ip packet detail

EIGRP - Default Route - Summary Address

Default route can be configure and redistributed through EIGRP, so each router no need to configure default route one by one.

Configure text below into interface s0/0 (Configure into interface which define as Router core):

• R1(config-router)#int s0/0
• R1(config-if)#ip summary-address eigrp 1 0.0.0.0 0.0.0.0

EIGRP - Basic Configuration & Filtering

Try to make configuration below :

As shown, the routing table will be :

EIGRP - Distribute List
Now, What if the ip loopback R2, don't have to be appear in routing table R1? then we could make filtering route using distribute-list :

Now, seems that Ip loopback R2 isn't included in R1 routing table.

is there any other option to deny IP address in Eigrp ? Check this one :

Filtering - Prefix List

Filtering prefix list being used, if we decided to make a filtering based on its netmask. For example on R3 where prefix /24-/28 will be blocked.

You have to make several ip loopbacks in R3, ip loopback in R3 is used as client network.

It shown on R1 that routing table with /24-/28 prefix is not included in routing table.

Eigrp - Filtering ACL

Configure ip loopback in R1 the advertised into eigrp and then make filtering as odd/even numbers.

In R3, make access-list & distribute list which define odd/even numbers as shown below :

• R3(config)#access-list 1 permit 0.0.0.0 255.255.255.254 ----------------> it is which define even
• R3(config)#access-list 1 permit 0.0.0.1 255.255.255.254 ----------------> it is which define odd

Intergate that access-list on router eigrp1 on R3.

• R3(config-router)#distribute-list 1 in fa0/0

As shown in R3, routing table only receive network 10.10.10.0 with even prefix.

EIGRP - Filtering AD
Configure with bigger AD, for example 255

• R3(config)#access-list 2 permit 1.1.1.1
• R3(config)#router eigrp 1
• R3(config-router)#distance 255 0.0.0.0 255.255.255.255 2 ---> access-list 2

The command "distance 255", manipulate its distance to be 255, as we know AD for eigrp is basicly 90.

Knowing EIGRP Routing Protocol on Cisco Router

     This time i will make a review about eigrp routing protocol, especially on cisco router.
First, you have to know this :

Introducing Eigrp

1. Eigrp is routing distance vector which means eigrp relying ont the diffused update algorithm to calculate the shortest path to a destination within network.The multicast address 224.0.0.10 usually broadcasting routing information to its neighbour. Its sends broadcast which have information about distance and direction. The direction define by metric while direction is its next-hop.
2. Fast Convergence, so this routing protocol is faster to gather information from all router in its topology.
3. Support VLSM means clasless
4. Manual Summarization, eigrp allows you to summarize internal and external routes on virtually any bit boundary using manual summarization.
5. Load balancing on equal & unequal cost which means eigrp can establish multiple link and make it load balancing/sharing based on each link bandwidth (cost metric).
6. Dual algorithm
7. Composite matric calculation (k5 value)
8. IP protocol number 88
9. Multicast 224.0.0.10
10. Auto-summarize by default, you have to add command "no auto-summary" on its configuration

Metric Value in EIGRP

1. By default its metric is Bw+delay
2. Delay = the amount of end to end (microseconds)*256
3. Bandwidth = [10^7/ minimum bandwidth, kbps]*256
4. Default formula K5 value [k1=1, k2=0, k3=1, k4=0, k5=0
5. Metric=[k1*BW+((k2*BW)/256-load))+k3*delay]
6. If k5 value not worth 0, then its metric value is =metric*[k5/(reliability+k4)]t

EIGRP Features

1. Only support MD5 authentication
2. Neighbour command can be used, if you want to make its update as unicast
3. Never ever use "passive-interface" on eigrp cause it will affect, the interface can't send/receive update
4. Route-filtering & Summarization is same as in RIP
5. By default its split-horizon is enable, use command "no ip split horizon eigrp xxx" to disable it

AD & FD (Administrator Distance & Feasible Distance)

1. The lowest metric value will be chose by EIGRP
2. AD = cost value between next-hop router and network destination
3. FD = cost values from local router to network destination = AD next-hop router+cost between local router and next-hop router
4. Lowest-cost = lowest FD
5. Successor = next-hop router with lowest cost value
6. Feassible Successor = Backup successor
7. the value of feasible successor is lower than its FD successor

Router Authentication

1. Support clear text authentication

• RIPv2
• OSPF
• IS-IS

1. Support MD5 Authentication

• RIPv2
• OSPF
• BGP 
• EIGRP

EIGRP MD5 Authentication

here are EIGRP MD5 configuration on cisco

• key-chain IDN
• key 1
• key-string cisco

int S0/0

• Ip authentication key-chain eigrp 100 IDN
• Ip authentication mode eigrp 100 md5

EIGRP Leak Map

Example, between network summary 10.0.0.0/8, there is one network 10.0.1.0/24 which you want to be treated specially, for instance is just like through the different path or treated differently from the other, then you can use Leak Map

• R1(config)#access-list 3 permit 10.0.1.0 0.0.0.255
• R1(config)#route-map Leak1 permit 10
• R1(config-route-map)#match ip address 3
• R1(config)#interface se0/0
• R1(config-if)#ip summary-address eigrp 1 10.0.0.0 255.0.0.0 leak-map Leak1

Advance EIGRP

1. By default, EIGRP have limit hop count 100, you can configure until 255 use command "metric maximum-hop 255"
2. Default AD to internal is 90, external 170. That value can be configured with these command "distance eigrp internal-AD-value external-AD-value"
3. Maximum default Routing protocol is just using 50% its bandwidth capacity. Meanwhile, this value can be configured with "ip bandwidth-percent eigrp AS"

 EIGRP Stub Routing

1. Stub means end, because the router is in the end eigrp, so it's not too necessary receiving routing update quite often, cause it's only have one gateway
2. With using stub, then network stbilization is more convincing
3. If it configure as only "eigrp stub", then the default is connected and summary
4. Connected means it will only shows route from the network which advertised by using network command and redistribute connected
5. The choice is :

• R1(config)#router eigrp 1
• R1(config-router)#eigrp stub [receive-only | static | summary | redistributed]

EIGRP Load Balancing

1. Each routing protocol whether it RIP, OSPF, EIGRP etc, definitely support equal cost path load balancing
2. However, IGRP & EIGRP supporting unequal cost path load balancing with these kind of configuration :

• router eigrp 1
• network x.x.x.x
• variance 2

EIGRP WAN Link

• EIGRP support WAN links below :

1. Point-to-point links
2. NBMA
3. Multipoint links

• EIGRP by default is using up to 50% bandwidth
• It can be configured with this configuration below:

1. R1(config-router)#int fa0/0
2. R1(config-subif)#ip bandwidth-percent eigrp 1 45

• If it is using bandwidth command. then EIGRP will use half of configured value

1. R1(config-router)#int fa0/0
2. R1(config-subif)#bandwidth 1024

EIGRP STUB Routing

• Receive-only : Router will not advertise its network to other router
• Connected : Router will only advertised its connected route, which come from network command
• Static : Router will advertise static route which have redistributed into EIGRP
• Summary : Router will advertised summary route
• Redistributed : Router will advertised any route which redistributed into EIGRP

Easiest Subnetting : Even 5 Years Old Can Do This

Hello, This is my first english article, Just give me a momment to translated it from google. Oke, i just want to review about ip subnet. As much as i know, subnetting is simple but almost engineer in entry level are strugling with that. So, let i tell you this tricky secret :

1. First, tell to your brain
    /24 is C Class
    /16 is B Class
    /8 is A Class

 2. Basicly, this subnetting methode is come from Ip address Class C which comes from multiple of 8
    /24 = 256 address per subnet, start from 0
    /25 = 128 half of 256
    /26 = 64
    /27 = 32 
    /28 = 16 half of 32
    /29 = 8
    /30 = 4
    /31 = 2 half of 4, and so on
    /32 = 1
   Just remember the underlined numbers 256,32,4.

3. Now start implementing this case
  
    CLASS C
    10.10.10.10.10/29
    The nearest number from /29 is /30 (which i told you to remember). So the Question is ?

    IP address persubnets = 8 (the nearest number you've remembered, divided or multipled it by 2)
    Network address = 10.10.10.8 (10.10.10.10 is included in range 8-15, the first is network)
                                    0-7

                                    8-15

                                    16-31

                                    and so on, untill 255

    Broadcast address = 10.10.10.15 (10.10.10.10 is included in range 8-15, the last is broadcast)

                                    0-7
                                    8-15
                                    16-31
                                    and so on, untill 255
    Host = 10.10.10.9 - 10.10.10.14
                Cause in range 8-15, the first is network and the last is broadcast.
                The number left will be host address, and could be use as your ip device.
    Subnet = 248 (256 - 8)
                   256 is amount of ip address in class c
                   8 is ip address per subnet.

    CLASS B
    30.30.30.30/23
    there is no nearest number. What should i do? easy man, i got it.
    How /23 could be as CLASS C ? just do this 23+8 = 31 which mean /31 = 2
    Where the 8 come from ? +8 is mandatory, the methode.
    So, what should i do with 2 ? ok this is the deal
    Ip address per subnets = 512
                                          2 x 256 (number of ip address in class c), got it?
    Network address = 30.30.30.0
    Broadcast address = 30.30.31.255
                                      Cause the ip address per subnet is 512
                                      You have to jump from 30.30.30.0 to 30.30.31.0
                                      Which mean all ip address in range 30.30.30.0 - 30.30.31.255 is included
    Host = 30.30.30.1 - 30.30.30.254
    Subnet = 255.255.255.254.0
                   254 is 256-2 Remember 2 ? Thats the clue, noted that.
   
    CLASS A
    50.50.50.50/14
    Make /14 as class. What should you do? 14+8= 22, thats not enough. 22+8 = 30. /30 = 4
    Ip address = 262144
                         4 x 65536
                         65536 is the amount of ip address in class B (256 x 256 ip addres ip class c)
    Network = 50.48.0.0
                      50 is on range 48-51
    Broadcast = 50.51.255.255
    Host = 50.48.0.1 - 50.51.255.255
    Subnet = 255.252.0.0
                   252 is from 256 - 4

So, with your hard work, you could do those thing even better. Good luck!

                              
  
  

Beberapa Hal Selo yang Bisa Dilakukan di Sorong

Now Playing : Happy - Pharrel Williams

"It might seem crazy what I’m about to say
Sunshine she’s here, you can take a break
I’m a hot air balloon that could go to space
With the air, like I don’t care baby by the way"

Liat Sunrise jadi inget kamu

     Pukul 05.37 WIT saya terbangun ketika playlist sedang memainkan Happy-Pharrel William, lagu yang sedang diputar pas sekali dengan suasana hati saya. Bagaimana tidak? ketika saya terbangun, saya disuguhkan pertunjukan sunrise dari dalam pesawat CGK-SOQ.

     Saya sedang menuju ke daerah di kepala burung cendrawasih, tepatnya kota Sorong. Sudah beberapa kali saya mengunjungi Sorong, namun percayalah perjalanan kali ini yang paling seru.

     Setibanya di Sorong, otak saya berpikir keras. 2x lipat lebih keras daripada ketika saya sedang bekerja. Saya berpikir apakah waktu yang akan saya habiskan hanya untuk bekerja saja? Well, saya bertekad untuk melakukan hal yang berbeda kali ini. Istilahnya saya akan mencuri waktu untuk liburan? oke liburan.

    Dimulailah petualangan saya pada hari pertama. Oke petualangan dimulai, dan hal keren yang saya lakukan adalah??? "bekerja", oke itu sama sekali gak keren. Tapi bagaimana lagi, saya memang dikirim untuk bekerja. Singkat cerita pekerjaan telah saya terselesaikan. Kok cepat? iya saya memang pekerja yang cepat, cekatan, & penuh integritas. Setidaknya itu yang ada dalam angan-angan HRD dan para motivator yang ada di twitter.

Jadi hal keren apa yang bisa kamu lakukan ketika berada di sorong? Berikut adalah rekam jejaknya :

1. Liat Sunset di Tembok Berlin

Sunset buat kamu

Tembok Berlin? Jerman dong. Bukan, gak semenarik itu. Sorong juga punya tembok Berlin, tapi bukan seperti Tembok Berlin di Jerman yang fungsinya untuk memisahkan wilayah Jerman Barat dengan Jerman Timur sebelum Perang Dunia ke II. Tembok Berlin di Sorong lebih santai, saking santainya kamu bisa pake kaos oblong dan celana kolor untuk main kesana. Gausah terlalu formal lah.

Di sana kamu bisa liat sunset romantis, rangkul-rangkul pacar orang, minum es kelapa muda, duduk diam sambil pasang aksen cool ala Rangga di film AADC sambil mengibas-ngibaskan rambut, ataupun instropeksi diri sambil berdzikir seperti yang saya lakukan. Maklum, saya anaknya Agamis banget :p

2. Makan Seafood Sesuka Hatimu

Seafood Tembok Berlin

     Makanlah sesuka hatimu, lepaskanlah hatimu dari belenggu masa lalu. Lepaskanlah........ *Curhat
Itu pun kalau kamu banyak uang.







3. Minum Beer Gratis di Pantai Tanjung Kasuari

Jim Morrison holds the beer

     Kamu mau beer gratis? mau banget? beneran mau nih? Cara biar bisa dapat beer gratis dari pace-pace ini adalah :

- Kamu harus lolos test verifikasi. Testnya gak berat kok, cuma harus luwes bergaul aja
- Kamu harus berkharisma, memiliki karakter kepemimpinan yang kuat, dan berintegritas

     Kalau tidak ada satupun karakter di atas ada pada diri kamu, jangan berkecil hati. Kamu cukup bawa kamera saja sambil sok akrab dengan pace-pace yang lagi setengah tinggi. Ajak ngobrol sebentar, ajak foto-foto dan kalau momentumnya sudah pas, ambillah beer sesuka kamu. As simple as Brad Pitt gets Angelina Jollie, isn't it?


4. #Selfie Terus di Pantai Tanjung Kasuari

     Buat kamu yang ngaku ganteng/cantik, kamu ditantang selfie sama om-om ini. Asal jangan sampai merusak kornea mata orang lain.

5. Main Detektif-Detektifan

     Bagi kamu penggemar Sherlock Holmes, Detective Conan, film series Dexter, NCIS, Hawai Five-O, dan game Criminal Case. Kamu bisa main detective-detective-an di pantai Tanjung Kasuari. Caranya gampang, tinggal suruh teman kamu untuk pura-pura mati di pantai. Buat garis pada sisi badan korban, dan mulailah identifikasi kenapa dia bisa pura-pura mati. Tapi ingat, Jangan telpon Polisi.

6. Beli Oleh-Oleh Sebelum Pulang

     Kamu harus beli oleh-oleh. Kalau kamu gak beli oleh-oleh kamu bisa saja hanya lihat oleh-oleh seperti yang saya lakukan. 

7. Adopsi Anak Jalanan

     Kamu bisa mengadopsi salah satu anak jalanan di sana. Oiya maaf, foto disamping bukan anak jalanan. Itu teman saya yang mengantarkan saya berkeliling Sorong. Piss Broo, hehehehe.....

Bagaimana? Epic bukan? bagi kalian yang suka jalan-jalan dan ingin pergi ke Sorong. Kalian bisa menghubungi saya untuk mendapatkan referensi tempat menginap ataupun tempat jalan-jalan lainnya, saya bisa dihubungi via emal : alfa.putrakurnia@gmail.com

Ahhhh Mennn, saya bersyukur sekali punya pekerjaan yang mengharuskan saya bisa melakukan pekerjaan sambil jalan-jalan keliling Indonesia.

"Because I’m happy

Clap along if you feel like happiness is the truth

Because I’m happy

Clap along if you know what happiness is to you

Because I’m happy

Clap along if you feel like that’s what you wanna do"